Category: Uncategorized

FS88H FIPS201/PIV Compliant USB2.0 Fingerprint Scanner
FS88H uses advanced CMOS sensor technology and precise optical system to meet the rigorous requirement on fingerprint image quality of PIV-071006. Its fingerprint scanning window is crown glass with a thickness of 14mm that resists scratches and other stress to ensure long term heavy duty usage. It is a robust but cost effective single finger capture device and ideal for border control, identity card, driver license, election and any type of civilian AFIS application.

Special electronic circuit is built into FS88H to do Live Finger Detection (LFD). With appropriate software in PC, user can select this LFD feature so that only live finger’s fingerprint will be scanned into PC. Fake fingers made from silicone rubber, play-doh, etc, will be rejected. And the LFD feature is included in all Futronic standard software.
A unique serial number is factory-programmed into the USB Device Descriptor of each FS88H. So every FS88H is traceable and this is very important for government identity management projects.

Futronic provides Application Programming Interface (API) for FS88H to capture fingerprint image on the following platforms:
Windows XP/2003, 32 bit and 64 bit.
Windows Vista/2008/2012, 32 bit and 64 bit.
Windows 7/8, 32 bit and 64 bit.
Linux with kernel 2.4 or higher (for both x86 and ARM9)
Windows CE 5.0 and 6.0 (for both x86 and ARM9)
MAC OS(version 10.5, 10.6 and 10.7, Intel CPU)
Android 3.1 and higher with USB Host port

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

Willdone AT55 Feature:
1) Cut Length: 15-999mm
2) Tape Width: 7-50mm
3) 2 tapes setting and 2 tapes cutting
4) Establish the size of the necessary sticky tape freely with unit 1mm, Can cut off and close and take etc. and work continuously automatically
5) Reel of 3 inches defends the static device
6) Electronic transliteration and red light can tell the mechanical breakdown

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

Willdone M1000 Feature:
1.Auto Feed & Cut Tape Dispenser that is deal for medium to high production of repetitive taping for industrial applications.
2. Only need to stick the tape tip to the outlet, then the tape at a required length will come out automatically
3. Auto mode and Manual mode is selective, in Auto mode, it will cut tape automatically.
4. When a long tape is needed, keep pressing “FORWARD” key to the desired length, then press “CUT” key.
5. The cutter unit cassette can be removed and replaced easily (tape jamming can be also easily fixed).
6. Cutting length is shown on the LED display, you can set the cutting length easily by “CM” and “MM” key.

Available tape type: PVC tape, paper tape, cloth tape, glass tape, pp tape, kraft adhesive tape ect.

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

Willdone TD-150
Specifications:
· Tape Width:20-150mm
· Tape Length :5-999mm
· Usable Tapes: various film, adhesive tape, non-adhesive tape, double sided tape.
· Max.Feeding Speed:200 mm /sec.
· Max. Outside Dia. of Roll:300mm
· Power Requirement: AC110/220V.50/60HZ.25W
· Dimensions & Weight:260(W) x 230(H) x 140(D) mm 6.2Kg

Features:
Cutting width: Max.150mm
Applied tapes: various film, adhesive tape, non-adhesive tape, double sided tape.
Economic and practical, greatly reduce the production cost
Operation modes: Auto/Manual

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

Features:
· Only need to pull the tape tip to the outlet, then the tape at a length will come out automatically
· Size indications can be easily seen by LED displays, and operations are simple
· When a long tape is needed, keep pressing forward key to the desired length
· The cutter unit cassette can be removed and replaced easily, tape jamming can be also easily fixed
· Two operation modes: automatic and manual
· Length setting memory function available.
· With tape sensor function:automatically lead out tape
· Enable to cut any inner core tapes,multifunctional
· Extra tape roll holder can be added, 2 layers or 3 layers, greatly improve efficiency
· Extra stripping hold can be added, best for aluminium-foil paper

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

Willdone Z-Cut9
1.It can be used in various sizes tape volumes without roller.
2.Set free cutting length of tape from .5 to 999mm
3.Memory function ( can be free to set up six different length of demand before operation).
4.Default, circulation and work count function.
5.It can cut two rolls of tape at the same time.
6.Built-in double sensors, pliers, lubricating oil, partition for simple operation.
7.It can be applied in protective film, aluminum foil and copper foil, insulation material.. etc
8.It can be used to cut Fiber sericin belt, hard tape, acetate, glass wall paper, double-sided adhesive, nomex, sealing glue, transparent tape, process tape, masking tape and plastic tape, etc and
No viscous material: protective film, the aluminum foil and copper foil, film, plastic material.. , etc

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

This fingerprint is anti-vandal design, it adopt the new dark background technology, making it easy to read the fingerprint even though under the direct sunlight. It support Fingerprint and EM card, and it can be also used as slave reader with wiegand 26.

· Metal structure, anti-vandal, simple & safe design
· Supports fingerprint & EM Card
· Using the dark background imaging technique, make the Fingerprints are always easy to be recognized in the variant light
· Conditions except the direct solar radiation Can add/delete the users’ fingerprints by manager fingerprint/cards very quickly.
· Infrared remote control for programmingAnti-magnetic ,prevent opening door by magnetic illegally
· Built-in PIR(passive infrared)to wake up the device from sleep mode.
· With Wiegand 26 input & output
· Supports: inter-connected; inter-locked, anti-tamper, door magnetic alarm,safe mode set
· Compliant with CE certificate

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

EP300 Pro
Color Screen Fingerprint, RFID card Time & Attendance Terminal

EP300 Pro is the new generation fingerprint time attendance terminal based on Linux platform and supports cloud application. EP300 Pro houses 3.5-inches color LCD and full capacitive keypads along with touch optical fingerprint sensor Full upgrade for EP300 Pro with battery will power your business anytime and anywhere. The webserver function realizes the easily self management of the device.The optional WIFI and Bluetooth function ensures flexible application of the device.

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech

MB560-VL is a multi-biometric identification terminal featuring ZKTeco’sinnovative Visible Light Facial Recognition technology. With the latest algorithm and facial recognition related technologies, the device can perform recognition of a target in a distance from 0.3m to 2m and will function automatically when it detects a face in the detection distance so as to deliver better recognition quality in terms of speed and accuracy than the previous near-infrared facial recognition terminal.

Display 2.8-inch TFT Screen

Face Capacity 3,000

Fingerprint Capacity 3,000

Card Capacity 10,000 (Optional)

Transactions 100,000

Communication TCP/IP, WiFi (Optional), USB Host

Sales Department: (02) 8781 0427 Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com Facebook: www.facebook.com/Scancodetech

MultiBio 800 is a time attendance and access control terminal for face and fingerprint verification. Using ZK lastest ZKFACE 7.0 high-speed face recognition algorithm, it has extremely high verification speed and low error rate.

Display 2.8 inch TFT LCD Color Screen
Face Capacity 800 (1:N)
Fingerprint Capacity 3,000
Card Capacity 5,000(Optional) ID/Mifare or HID card
Transaction Capacity 100,000 Transactions
Algorithm Version ZKFinger VX10.0 & ZKFace VX7.0

Sales Department: (02) 8781 0427
Sales E-mail: admin@scancode.com.ph / scancodetech@gmail.com
Facebook: www.facebook.com/Scancodetech